<optgroup id="yuw6a"></optgroup><center id="yuw6a"><wbr id="yuw6a"></wbr></center>
<noscript id="yuw6a"></noscript>
Add To Favorites| Feedback| Contact Us Welcome to visit Danyang Tianyi Diamond Tools Co., ltd.!
Product quality witness

Information Hotline:0511-86196699

current location: Skip Navigation LinksHome > News Center > 查看詳情

How to identify the quality of diamond saw blade?

> From:TianYi Browse:- Release date:2016/10/12【

Diamond saw blade is the most ideal stone cutting tools. Today, silver day saw blade experts will explain to you, from which to identify the quality of the saw blade.
Diamond saw blade is the most ideal stone cutting tools. Today, silver day saw blade experts will explain to you, from which to identify the quality of the saw blade.
First of all, the observation of the concentration and distribution of the sand, which is exposed on the top of the cutter head, is observed. Good diamond saw blade, the content of diamond is not too little, but it is not too much, and dispersed evenly.
Second look at the welding situation, you can start from two points. First, observe whether the welding seam is complete, tidy. If the welding seam is not continuous, and the edge of the cutter head and the substrate is not vertically aligned, the chip and the heat radiation can be affected. And it is possible to cause the cutter head to fall off. Second, the saw blade in his hand, observe the diamond cutter head and the matrix in the horizontal plane are aligned, the knife head if uneven, zigzag, is likely to use in the process caused by plate edge collapse, even the knife head off.
Again, the contrast between the thickness of the tool head and the thickness of the substrate. The 350mm granite blade as an example, under normal circumstances, the cutter head to the matrix thickness is about 1mm. 350mm marble saw blade will than the substrate thickness is about 0.2mm-0.5mm. The reason for this design is to avoid damage to the substrate and to improve the service life of the saw blade.
In addition, the contradiction between the blade sharpness and wear, there will be a shift. Our proposal is that when the saw blade life reaches the expected target, and the sharpness is moderate, do not ask for increased life. Because the external environment, such as the cutting machine, the operation of workers, the hardness of stone and other conditions will change at any time, and once the external environment changes, the original wear resistant type saw blade is not necessarily able to use.
Sharp tools make good work。 Whether it is stone manufacturers, traders or dealers, select a reliable supplier and to find the applicable blade, is the guarantee of the success of the cause.

Contact Us
Hontline:

0511-86196699

Mobile:13806101303

Website:http://www.jstytools.com

Adresss:Danyang City, Mai Creek Industrial Park

好屌爽在线视频